The T for joints RUBI form, without any doubt, a really indispensable range for obtaining perfect finishes in any work of installation of ceramic tile to breakers.
RUBI manufactures the T for joints with a high quality base material and, for this reason, they do not present any type of imperfections or burrs. The T for joints of 1, 1.5, 2 and 3 mm are recommended for the installation of ceramic tiles and pavements with minimal joint. The solid structure of the T for joints of 1, 1.5, 2 and 3 mm has been designed to provide greater resistance to bending and crushing. These properties make the T for joints of 1, 1.5, 2 and 3 mm are highly recommended for coatings with large format ceramic tiles.
The internal geometry of the T for joints of 5 mm has been designed to provide greater resistance to bending and crushing.
The internal geometry of the T for joints of 7 to 10 mm is hollow and has a design with internal reinforcements that allows them to withstand stresses and prevent their crushing. This hollow design facilitates the entrance of the joint mortar and, if the type of installation allows it, leave the T inside the installation joint, without affecting the integrity of the joint in the future.
The professional planer is very aware of the importance of using high quality separators, since the finish of his work can be seriously damaged due to imperfections and irregularities.
The T for RUBI joints stand out for the regularity of their productions, the homogeneity of measurements and the absence of burrs and any other small defect. These particularities allow professionals who rely on the T for RUBI joints to obtain excellent finishes and with total precision.
RUBI is committed to quality. All our products and tools are subjected to rigorous quality exams by experienced professionals. We want all the products we have in the market to be recognized for their quality and durability. This desire has made our brand one of the most valued when it comes to providing quality solutions to the professional of laying ceramic tile and construction.
Hollow structure with internal reinforcements. Supports the tensions and allows to leave into the joint and to grout over.
Ideal for discontinuous and perimeter placement.
Quality base material, without impurities or imperfections.